• עברית
  • English

972 8 6570303

Product Catalog

VS 5 Series

VS 5 Series

  • One-piece complete chemical/fi re brigade protection suit (CPS) with permanently built-in visor for unlimited use by fire brigades.
  • The protection suits (CPS) of this series have been tested or certifi ed to DIN EN 943 Part 1 or (partly) to DIN EN 943 Part 2 (emergency teams (ET), for unrestricted use in fire brigades) according to Directive 89/686/EEC.
  • Type 1a = gas-tight chemical protection suit with breathing air supply worn inside the chemical protection suit, for example compressed air equipment.
  • All popular firefighter helmets and industrial hard hats can be worn under the suit. We recommend a helmet to DIN EN 397 for industrial hard hats and EN 12492 for mountaineering helmets.

 

Standard equipment, VS 5 series

  • A permanently installed, transparent non-fogging visor with additional PTFE foil window. The window provides protection from all reference chemicals to DIN EN 943 Part 2 (ET).
  • Five-finger exchangeable chemical protection gloves with the TESIMAX exchange system are fitted (standard: Size 10). Inner or overgloves are not generally required. For models and possible alternatives see the model description.
  • Safety boots, size 46, certified to DIN EN 15090, DIN EN ISO 20345 and DIN EN 13832-3 are exchangeable (TESIMAX replacement system). For other sizes (43–47) see Extras. Some hazmat suit models are equipped with PRISMA safety boots to DIN EN 344 and DIN EN 345 (see models). These boots are resistant against chemicals such as oils and grease.
  • The suit features braces that are attached at the crotch (DGBM G 900 1497.0, EP 0440954 or US patent No. 5.133.092) and allow the suit to be adjusted to the wearer’s size and to evenly distribute its weight across both shoulders.
  • The suit incorporates a radio pocket.
  • The 130 cm long, gas- and liquid-tight zip is fitted on the right side and is protected with a labyrinth cover and closes from bottom to top.
  • The suit features two safety (exhalation) valves with an additional splash cover made from suit fabric.
  • All hazmat suits of this series are prepared for later installation of an external F-AU 1-4 series forced ventilation system.
  • The suit is supplied in a black, tear-resistant storage bag for flat storage. For other bags Extras.